Product

AKSESORIS

Sell Roof Accessories

To meet all metal roof and wall covering needs, IDEALTATA also offers various supporting accessories, such as standard flashing, non-standard flashing, metal list plank, metal gutters, and roofing and walling bolts or screws.

The function of the accessories is as an additional material to resist leakage, continue the flow of water and to beautify the appearance.

RIDGE CAPPING

IDEAL RIDGE CAPPING is a roofing accessory that is used to cover the gap between the two roof sheets (at the top of the roof), so it doesn’t leak and gives a neat impression.

SIDE CAPPING

IDEAL SITE CAPPING is a roofing accessory that is used to cover the gap where the roof meets the cladding

BOTTOM PARAPET FLASHING

IDEAL BOTTOM PARAPET FLASHING is a roof accessory that is used to cover the gap between the cladding meeting above the roofing

STANDARD GUTTER

IDEAL STANDARD GUTTER is a roof accessory that is used to make gutters so that water does not fall directly from the roof to the floor / ground.

END GUTTER

End gutter or gutter cover is a construction element located at the end or corner of a building’s roof whose role is to collect rainwater that flows from the roof of the building and direct it to the water drainage system.

Material: Zincalume, Clean Colorbond, Aluminium, Stainless Steel

Aplikasi: Close the gutter

NON-STANDARD RAINWATER HEAD

IDEAL NON-STANDARD RAINWATER HEAD is a roof accessory that is used to connect the gutter to the down pipe

EDGE STOP, SLAB 100MM

IDEAL EDGE STOP, SLAB 100MM is a floordeck accessory that is used at the edge of the floor to limit the height of the concrete.

BRACKETS

IDEAL BRACKETS are floor deck accessories that are used to tie the edge stop to the floor deck.

END STOP

IDEAL END STOP is a floor deck accessory that is used to cover the wave area to be cast so it doesn’t spill.

BAUT / SCREW

Bolt or screws have the function of fastening the connection between the roof and the frame so that it does not come off easily. Roofing screws have several types of sizes (length, head diameter, and thread distance) that can be adjusted to your needs.

Aplikasi: Roofing dan Walling

  • 10-16×16
  • 12-14×20
  • 12-14×30
  • 10-24×22
  • 10-24×32
  • 12-24×32
  • 12-14×38
  • 12-14×65
  • 12-24×50
  • 12-14×48
  • 12-14×68
  • 12-14×75
  • 12-14×100
  • 12-14×130
  • 12-14×25
  • 10-14×25

IDEALTATA

(021) 2605 1194 , (021) 2605 1334

081380998119

Idealtatamarketing@gmail.com

Operational hour
Monday – Thursday : 08.00 – 17.00
Friday: 08.00 – 17.30

Contact Us

Text Us!
Text Us!
Idealtata Customer Service
Hallo Idealtata,
Saya Ingin Mendapat Info Lebih Lengkap!